Using OzRunways and RWY with Flight Simulators (X-Plane, Flight Simulator/Prepar3d, or Microsoft Flight Simulator 2020)
OzRunways works with Microsoft Flight Simulator 2020 with the use of a third party tool called Xmapsy. See the Xmapsy website for further information: https://xmapsy.com
You can use OzRwy with X-Plane, Microsoft Flight Simulator (FSX) and Prepar3d by Lockheed Martin. RWY requires 3rd party software, but can be connected to X-Plane. The ability to connect RWY to MS FSX and Prepar3d is not known, and this pursuit is not supported by OzRunways.
X-Plane works on Mac, Linux and Windows and requires the settings that you can find here (see amendment below for X-Plane 11 but note Read the Plane 9-10 documentation first, because the screens might be different in X-Plane 11 but the steps required are exactly the same in terms of setup!!!!): OzRunways_XPlane9-10_Documentation.pdf
Once you have read the PDF above, take note of the following settings to make the heading work in X-Plane 11:
The simplest way to run OzRunways with FSX and P3D is to head to this site:
and pick up the free FSX/P3D to OzRunways connector app, designed by the talented Rob Graham.
To use the app, extract it to a folder of your choice. Make sure your iPad and PC are on the same home wifi network. Next, open FSX or P3D. If using P3D v4, make sure options>general>Broadcast GPS data to Network is set to off. Next, open the connector app and click 'Connect'. In OzRWY go to OzRunways>Settings>Simulator Mode>On and it should be good to go!
Alternate FSX/Prepar3d setup using FSUIPC
This method requires the following:
-Wifi network (static IP's is the best setup, google 'How to set up a static IP', there are lots of articles on this subject to help you out. OzRunways does not support setting up of home wifi networks with static IP's). -iPad running OzRunways, connected to wifi network -PC running FSX or Prepar3d with a Registered version of FSUIPC installed (not supported by OzRunways) connected to the same wifi network (or at least the same router as the iPad is working through) -FSXozplug LUA (not supported, contact the author of this script for help)
Firstly, set up your home network (with static IP's if possible, otherwise you'll need to do the setup every time you want to use OzRunways with the sim in case the ip's have changed). Not having static IP addresses for your network will more than likely cause you issues. It is worth the time and effort to do. The reason OzRunways can't really assist with network setup is every modem is different and it is impossible for us to know how each one works. But, the internet has lots of articles and on balance, you will probably find something to help you do it through a quick internet search.
Secondly, ensure you have a registered version of FSUIPC installed to your sim. See here for all the information: http://www.schiratti.com/dowson.html
Thirdly, download and install the FSX plugin (LUA) which you can find here:
FSX-Plug-In-for-OzRunways-v1.1.zip. This plugin works and installs the same for Prepar3d.
NOTE: For some reason the LUA when used with Prepar3d 2.5 does not function correctly, however v3.1 does. This seems to be a problem outside of the scope of OzRunways. Please contact LM or P. Dowson (FSUIPC author) to discuss.
Simply place the LUA and vstruct folder in your FSX/P3D modules folder.
Now open the FSXozplug file in notepad or another text editor and change to the appropriate iPad IP address (instructions in the top section of the fsxozplug LUA file on how to do this). For an example of what the section from the authors FSXozplug.lua looks like:
host = host or "192.168.8.123" -- USER EDIT THIS FOR YOUR IPDA/IPHONE RUNNING OZRUNWAYS
port = port or 49002
Close and save the FSXozplug.lua
Next, you will need to open your FSUIPC.ini (configuration) file (lives in the FSX>Modules folder) and add the required details to enable the LUA to run (again, instructions on exactly what is needed are contained in the top section of the FSXozplug LUA). The two sections should look a bit like this:
[Auto] 1=Lua FSXOzplug
Close and save your FSUIPC4.ini file.
Now, ensure your computer and iPad are on the same wifi network, enable sim mode on your OzRunways through settings>simulator mode>(select Simulator mode 'on'). Start FSX/Prepar3d.
Note: OzRunways will default to sim mode off if you put the ipad to sleep - it can be handy to have it plugged in when simming to keep the battery topped up.
Once in the sim the OzRunways position should refelect the sim if you have done everything correctly.
Some users may have issues with firewalls etc. Unfortunately OzRunways does not support firewall / networking issues.
Your Android device requires third party software which will allow the GPS signal to be 'spoofed'. As RWY simply reads the position given to it by the device, you then need to connect your chosen sim to your chosen third party 'GPS Spoofing' software to make it all work. OzRunways Pty Ltd does not produce, nor do we support any 3rd party GPS Spoofing software or FS/Xplane software or addons. One app we know of for spoofing the Android GPS is called 'X-Plane to GPS' and as of 2017 was available on the play store. The manual can be found here http://www.appropel.com/manuals/X-Plane%20to%20GPS%20Manual.pdf
- How do I make it track-up?
- Export plan sheet to pdf, export map print page to pdf etc for iOS
- Will my iPad’s GPS work without a sim-card or a signal ?
- Can iPhone tethering (hotspot) give the iPad a GPS position? No and here is why.
- CAAP 234 Guidelines for Aircraft Fuel Requirements Update
- View all (53 more)